AMT 97-4C, Руководство пользователя

Страница: 5 / 9

5
Omni pattern. The microphone is powered either by a 9 Volt Battery or 48 Volt Phantom power. The LED indicates status of the voltage.
Low profile microphone allows it to be placed under the strings and clipped to the side of the sound hole. Connect the microphone cable to
the included pre-amp. See instructions Studio preamps.
Instructions AMT 97C & 97-4C
Included in the AMT A97-4C set is 4 drum / percussion microphones with 4 “Inline” preamps. Phantom power required for use of
“Inline Preamps”.
Use the A97 with:
Drums
Tom Toms
Snare Drum
Hand Percussion
A97 – 4C Comes with:
4 AMT A97's Microphone
4 Inline preamps.
Hard shell Blo-mold protective case.
Instructions AMT ERTS
Included with AMT ERTS 1 microphone with 1 “Inline” preamp, and 1 clamp. Phantom power required for use of “Inline Preamps”.
Use the ERTS with:
Banjo
Hand Percussion
Included with the ERTS:
1 AMT ERTS Microphone and special clamp.
1 Inline Preamp.
AMT Studio Series Microphone Instructions
The AMT Studio Microphone versions combine the most natural clip-on microphone systems on the market with
the AMT AP40 floor pre-amp. The AP40 replaces the stock AMT BP40 belt pack pre-amp. The AP40 converts
the microphones to low impedance; it regulates the voltage to each microphone, and with certain models creates a
specific frequency curve. The curve is necessary is on certain models or instruments in order to maintain the
most natural reproduction of sound in conjunction with the achieving the most amount of gain before feedback in
a live application. The output of the preamp is an XLR Low Impedance balanced output. The output sends
signal at Mic Level.
Studio (AP40) Pre-amp:
Works with 9 Volt Battery OR Phantom Power.