AMT 25FP10YR, Инструкция по эксплуатации и запасным частям

Страница: 6 / 16

Specifications Information and Repair Parts Manual
25FP Series
25FP-250-00 6 10/2017
25FP Fire Pump Series
Hand Primer Reassembly and Installation:
1. Install new diaphragm if needed on plunger rod, secure with fastener.
2. Position diaphragm in body groove.
3. Install lower body half to upper half with screws.
NOTE: Inspect inlet check ball for wear and correct operation, replace as
needed.
4. Install new inlet check ball, check ball seat bushing and reducing bushing
into lower body half.
5. Install street elbow and vacuum hose assembly.
6. Install hand primer assembly onto frame mounting bracket with screws.
7. Install SAE female fitting of vacuum hose onto male SAE fitting, that is
part of casing vacuum fitting assembly.
EVAPORATIVE EMISSIONS CONTROL INFORMATION
(Pertains to gasoline fuel only)
Maintenance
1. Periodically check fuel lines, vent lines, fittings, fuel tank and tank cap for
damage or leaks. Clean as needed. Replace any leaking or damaged parts
with direct factory replacements or identical EPA certified equivalents.
2. Replacement fuel lines must have the same SAE rating. Fittings must
be same type and material. Use factory replacement fuel tank. Tank cap
must be metal non-venting type.
Warranty
These warranty statements apply solely to the evaporative emissions
equipment installed on the unit; fuel tank, fuel tank cap, fuel line, tank vent
line, fittings and valves. For warranty information pertaining to all other parts,
see the general AMT warranty at http://www.amtpump.com/products/PDF/
warranty.pdf or contact AMT directly for a printed copy.
1. The evaporative emissions equipment on gasoline fueled pumps is
designed, built and equipped to conform to current EPA requirements.
They are warranted to be free from defects in materials and workmanship.
2. Warranty coverage may be denied if a part has failed due to abuse,neglect,
improper maintenance or unapproved modifications.
3. Warranty period is two years from point of first retail sale.
4. Any warranty claim concerning the evaporative emissions equipment
must be directed to the person who last sold the pump, a local distributor,
or directly to AMT Pump Company (AMT).
5. Any part deemed to be defective by AMT will be replaced at no charge and
shipped directly to the end user or distributor for replacement. AMT may
require the end user to first return the part in question for inspectionbefore
replacement parts are shipped.