AMT Datasouth Fastmark 600 Series Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 89

AMT Datasouth Fastmark 600 Series Скачать руководство пользователя страница 30

Fastmark 600 Series User's Guide

30

8.

Once the media comes out of the larger slot, gently roll the excess media back onto the
Media Roll until the Backing is snug around the Peel Bar.

9.

In this position the Media Backing coming out of the large slot in the front cover should
be aligned with the Labels coming out of the printer.

Note

:

If not, then pull down the Peeler Latch and gently pull the backing until they are
aligned. Make sure to close the Peeler Latch when done.

10.

Close and lock the print head module by pressing firmly until the right and left

Print

Head Latches

snap shut.

11.

Close the

Media Access Cover

.

12.

Press the Feed Button until the first label is peeled off.

Note:

In this position the trailing edge of the media may be caught between the Platen
and the Printhead and will not be removable until the next printing. Verify that
all Peeler Features in the Setup Menu are properly set (BackFeed, Present
Distance, and Peeler Sensor) for your application.

Figure 27 – Peeler Option

«
...
28
29
30
31
32
...
»

Содержание Fastmark 600 Series


























































































Отзывы:

Нет отзывов