ACCEL-7450
-
27
-
Head adjustment lever
This lever sets the gap between the print head and the paper.
For most printing, the lever position should be to AUTO. This setting allows
the printer to measure the paper thickness and adjust the print head gap
automatically.
The print head gap can also be manually set for 1 to 7 part forms.
Special Key Functions
Special key functions are executed by pressing and holding the keys
indicated in the following table while simultaneously turning on the printer
power. Load paper first to avoid error indication.
Function
Key
Initialization #1
HIGH LF+POWER
ASCII self-test
LF + POWER
Hex Dump
SPEED + POWER
Character H printing mode
TEAR OFF + POWER
Pin testing
HIGH POWER
Alignments adjust
ENTER + RLF + POWER
Adjust the tear off position
(For tractor paper)
Online state, press and hold the TEAR OFF key
three seconds.
