AMT Datasouth Accel-7350, Руководство пользователя

Страница: 35 / 47

Chapter 2
• Head adjustment lever
7
1
AUTO
This lever is for adjusting the gap between
the print head and the paper.
The lever position should be at "AUTO " normally, which adjusts the gap in
accordance with the SETUP MODE. When " AUTO " is selected on the panel,
the printer measures the paper thickness and adjusts the gap between the print
head and the paper automatically.
1 HEAD ADJUSTMENT
In case that the graduation 1 - 7 is selected, the gap between print head and
paper is fixed.
Best position can be selected manually to meet the paper thickness as follows;
Graduation 1 for 1 sheet form.
Graduation 7 for 7 sheets multipart form.
• Key shortcut functions
Key shortcut functions are executed by pressing and holding the corresponding
keys while simultaneously turning on the printer power. The following table
shows the available shortcut functions.
Page 34 of 46