Combination Changing Instructions for the ESL5-LP Electronic Safe Lock
-- CAUTION --
Combination changes should always be done with the door locked OPEN.
To change the combination, do the following:
a. Press the keys “C” and then “#”. The unit responds with a short warbling tone (called the “good
combo tone”) and the keypad lamps strobe with the tone.
b. Now key in the old 6 digit combination. The “C” key may be used to clear an error in keying at any
time. Finish the input with a “#” key.
1. If the old combination keyed matches the existing combination in permanent memory, another
short good combo tone is sounded. Proceed to “c.”
2. If the combination keyed is incorrect, the unit responds with 4 short beeps (called the bad
combo tone) and returns to rest. The combination change routine is aborted and the old
combination is retained. This also causes a count up for Penalty Lockout.
c. Now key the first pass with the New 6 digit combination followed by a “#” key. Again, the “C” key may
be used to clear an error in keying at any time.
1. If the combination input is 6 digits in length, another short good combo tone is sounded.
Proceed to “d.”
2. If the combination keyed is not 6 digits long, the unit responds with 4 short beeps (bad combo
tone) and returns to rest. The combination change routine is aborted and the old combination is
retained.
d. Now key the second (verify) pass with the New 6 digit combination followed by a “#” key. As before,
the “C” key may be used to clear an error in keying at any time.
1. If the combination input matched the first pass, a long good combo tone is sounded. The new
combination replaces the old combination in permanent memory and the unit returns to a
resting condition. Proceed to “e.”
2. If the combination keyed does not match the first pass, the unit responds with the bad combo
tone and returns to rest. The combination change routine is aborted and the old combination is
retained.
e. Test your new combination several times prior to closing and locking the safe.
«
CAUTION!
Liquids can damage the keypad
