AMSAN AM-TPL12CF, Руководство пользователя

Страница: 23 / 28

Two Post Car Lift AM-TPL12CF
23
TROUBLESHOOTING
Problem Reason Solution
Motor does not
work
•
Incorrect Voltage to motor
•
Motor burned out
•
Fuses are blown
•
Start Button damaged
•
Limit or Microswitch
burned out
•
Check the power fuse and
reset the breaker
•
See if the power unit wired
correctly
•
Avoid extension cords
•
Double-check the installation
manual if any step got missed
Lift does not
raise
•
Incorrect voltage to power
unit
•
Internal leak to cylinder
and lowering valve
•
Motor damaged
•
Oil has air in it
•
Dirty oil
•
Hydraulic leak
•
Load exceeds the
capacity of the lift
•
Replace dirty oil and use
Dexron ATF
•
Check oil level if low top it up to
the correct level
•
See installation manual for
bleed cylinders
•
Double-check the voltage and
wiring
•
Replace Damaged motor
•
Thorough inspect lift for
leakage and fix them
•
Double-check the load
Capacity and make sure it’s
below the rated capacity for the
vehicle lift
Lift does not
stay up
•
Oil has air in it
•
Internal leak to cylinder
and lowering valve
•
Motor damaged
•
Fitting leaks
•
Check oil level if low top it up to
the correct level
•
See installation manual for
bleed cylinders
•
Replace Damaged motor
Loud noise
coming from
the Lift while
raising/loweri
ng the load
•
The sliding and rotational
parts missing lubrication
•
Damaged Sliders or
Sliders missing lubrication
•
Add lubrication to sliders and
other rotational parts
•
Replace Sliders
Power Unit
makes noise
and does not
work.
•
Capacitor is damaged.
•
The voltage is too low.
•
The equipment is used
overload.
•
Replace the Capacitor
•
Have an electrician check the
low voltage issue
Motor has
insufficient
pressure
to
raise the lift
•
Hydraulic leak
•
Load exceeds the
capacity of the lift
•
Low Fluid level
•
Remove the leak
•
Double-check the load
Capacity and make sure its
below the rated capacity for the