AMSAN AM-TPL12CF, Руководство пользователя

Страница: 11 / 28

Two Post Car Lift AM-TPL12CF
11
FOUNDATION REQUIREMENTS
•
Visually inspect the site where the lift is to be installed and check for cracked
or defective concrete
•
DO NOT install or use this lift on expansion seams or cracked or defective
concrete.
•
DO NOT install or use this lift on any asphalt surface or any surface other than
concrete.
•
Lift is designed for INDOOR INSTALLATION ONLY.
•
This lift must be installed on a solid level concrete floor with no more than 3-
degrees of slope.
•
Lift buyers are responsible for any special regional structural and/or seismic
anchoring requirements specified by any other agencies and/or codes such as
the Uniform Building Code (UBC) and/or International Building Code (IBC).
•
All models MUST be installed on 3000 PSI concrete and have a minimum of 12”
thickness with steel or fiber mesh. New concrete must be adequately cured by
at least 30 days minimum.
Installation area picture (See figure below.)