background image

 

 

                                                              www.american-media.com 

 Page 

3  

Venus T5c Series

 

---Front Panel--- (see 

Figure 4

Figure 4 

D1:Temperature LED 
D2:Fan LED 
D3---D7: HDD Access and failure LED (Green LED 

is lighting when HDD link and blinking 
when HDD access; the LED will turn red 
when HDD failed. The green LED and red 
LED will alternate during rebuilding) 

D8:SYS LED: Lighting while system is ready   
D9:SYS Reset or Backup (option) 
D10:HDD Safety Lock 
D11:Power LED 
D12:Power Safety Lock (The safety lock prevent 

it bouncing out while HDD is working)

 

D13:120W Switching Power Supply 

---Rear View--- (see 

Figure 5

Figure 5 

E1:Cooling Fan #1 (8x8cm) 
E2:Fan Speed Control FAN RPM HIGH(3600rpm)&
      LOW(2800 rpm) Options(If you want the fan to 

    run at a high speed ,switch to the right; otherwise 

      , switch to the left 
E3: Cooling Fan #2 (8x8cm) 
E4: Reset/Change Mode (push button less than 2 

seconds for system reset / hold button over than 
2 seconds for apply new RAID mode) 

E5:RAID CONFIGURE SW 
E6:ESATA 
E7:Power SW 
E8:Power Input(AC 100V-240V) 

Содержание Venus T5c DS-2350C








Отзывы: