AMS TSL2584TSV Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 10

AMS TSL2584TSV Скачать руководство пользователя страница 10

page 10/10

2.1.5.4

ALS Data Plot

The remaining portion of the ALS tab is used to display a running plot of the collected ALS values
and the calculated lux values. The last 350 values are collected and plotted on the graph. As
additional values are added, the old values will be deleted from the left side of the graph.

The Enable Plot checkbox activates the plotting function. Data will only be plotted when this box is
checked.
The CH0, CH1, and Lux checkboxes control which values will be displayed on the plot. Only the
checked values will be displayed.
Click the Clear Plot button to discard the current data and continue plotting the new data. Note, if
the Clear Plot button is clicked while the plot is disabled, the data is discarded, but the actual plot
will not be updated until the plot function is re-enabled.
The Scale of the Y-axis of the plot can be adjusted by clicking on the small up and down arrows at
the top left corner of the plot. The scale can be set to any power of 2 from 64 through 65536.

3

Resources

TSL2584TSV datasheet

TSL2584TSV EVM Quick Start Guide (QSG)

Designer’s Notebooks

For additional information regarding the TSL2584TSV, please refer to the datasheet. For
information regarding the installation of the TSL2584TSV EVM host application software please
refer to the TSL2584TSV EVM Quick Start Guide.

Designer’s Notebooks dealing with various aspects of optical measurement and optical

measurement applications are available. All content is available on the

ams

website,

www.ams.com

.

«
...
8
9
10

Содержание TSL2584TSV











Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды