AMS SCRAM, Краткое руководство пользователя, Страница: 9 / 28

SCRAM Remote Breath
Most fl exible option in breath alcohol testing!
4
Select monitoring type. 10.
SCRAM Remote Breath • radio button.
Priority Notifi cation • check box (optional).
Grace Period •
Click the
11. Save Client and Assign Equipment
button.
The Assign Remote Breath page appears.
A
SSIGN
SCRAM R
EMOTE
B
REATH
D
EVICE
Prior to assigning the device:
Plug the power cord into the SCRAM Remote 1.
Breath device and into an electrical outlet.
The
green battery light will blink when the device
is fully charged. This may take several minutes to
several hours, depending on how much the battery
is currently charged. Fully charging a dead battery
takes six hours.
To assign a device:
In SCRAM 1.
NET
, locate the client’s Equipment page.
Click the Assign Equipment button to access the 2.
Equipment Setup Wizard.
Enter the device being assigned in the
3. Serial Num-
ber fi eld.
Click the
4. Assign button.
Click the 5. Finish button to exit the wizard.
The client’s Equipment page appears with the
SCRAM Remote Breath status set to “Pending As-
signment”.
Instruct the client to perform an initial breath test.
6.
Press and hold the a. Power button on the device
for approximately fi ve seconds until the battery
light turns green .
The device will power up and display PLEASE
WAIT.
In approximately one minute, the device dis-
plays READY TO ENROLL.