B1: “MODE/SET” button
B2: “
” button
B3: “
/
!
” button
B4: “ALARM ON/OFF” button
B5: “RESET” button
B6: “SNOOZE” button
B7: Alarm mode slide switch
Part C:
C1: Wall Mount Hole
C2: Stand
C3: Battery Compartment
3. Getting Started:
3.1 Main Unit:
●
Slide open battery compartment cover [C3]
●
Insert 4 x AA size batteries observing polarity [“+” and“ –“ marks].
●
Replace battery compartment cover [C3]
4. Time and Alarm Setting
4.1 Radio Controlled Clock:
●
After batteries inserted, the clock automatically starts to scan the DCF
time signal. Radio Control Icon“
” flashes on the LCD.
●
The clock automatically scans the time signal at 3.00 a.m. every day to
maintain accurate timing. If reception fail, scanning stops (“ ” on LCD
disappear)
●
The clock can be set to scan the time signal manually by holding “ ”
button (B3) for 3 seconds. Each reception takes about 5 minutes.
●
Stop scanning by holding “ ” button (B3) for 3 seconds.
●
“
” shown on the LCD if it is in Daylight Saving Time Mode
4.2 Manual Time Setting:
●
In time display mode, hold “MODE” button (B1) for 3 seconds to enter
Clock/Calendar setting Mode.
●
Press “
” (B2) or “
” (B3) button to adjust the setting and press
“MODE” button (B1) to confirm each setting.
(By keeping the “
” (B2) or “
” (B3) button pressed, could
accelerate the process and reach the desired value more quickly)
●
The setting sequence is shown as follow: 12/24Hour, RCC on/off, Time
Zone, Weekday Language, Hour, Minute, Second, Year, Month, Date,
Temperature Unit, Alarm sound duration.
flashes,
Indicating now is
receiving DCF signal
turns on,
Indicating signal
received successfully
disappear,
Indicating signal
reception failed