15
TROUBLE SHOOTING
“WARNING”
LOCK OUT POWER before performing any cleaning, oiling, maintenance, or trouble
shooting.
PROBLEM
POSSIBLE CAUSE
REMEDY
Machine will not turn off
using stop buttons.
Defective stop button.
Contacts burned together
in reversing contactor.
Check continuity (N.C.) If
bad, replace.
Check each leg of forward
side of contactor for
continuity. There should
be no continuity. If there
is, consult factory for
replacement part.
Machine will not run in
forward or reverse.
If power light is
illuminated, proceed to
possible cause seven.
1)
No power.
2)
Key switch off.
3)
Fuse blown in
disconnect.
4)
Overload tripped in
panel.
Check power supply.
Turn on.
Remove each fuse and
check for continuity. If
bad, replace.
Reset.
Содержание DS-10
Страница 13: ...13 SYSTEM LAYOUT ...
Страница 14: ...14 NAMEPLATE MODEL NO AMS DS 10 SINGLE 10 HP SERIAL NO 3 PHASE 230 460 VOLT 60 CYCLE A C AMPS ...
Страница 20: ...20 MACHINE ASSEMBLY CUTTER HEAD ASSEMBLY ...
Страница 21: ...21 ...