AS3956 Standard Board
ams Demo Kit Manual
Page 15
[v1-2] 2017-Oct-30
Document Feedback
Figure 8: AS395x GUI – Create NDEF Message
When ready, press
Ok
to close the NDEF message dialog and go back to the
Type 2 Tag
tab and
there press
Write
. A message box will pop up to inform if writing the NDEF message was
successful.
Figure 9: AS395x GUI – NDEF Message Created
The message is written into the AS3956 EEPROM and the board can be disconnected from USB.
Any reader/NFC enabled phone will be able to read out the NDEF message.
x
