UK-5
Password entered:
Rotate the "VOLUME" knob to choose
the figures, press the ">>" button to enter
the next figure, press the "<<" button to
change the figure in case of error. Once
the password is fully displayed, press the
"SEL" button at least 2 seconds to confirm,
the radio switches to the tuner mode. If the
password is incorrect, "ERROR" appears
on the display. Please enter the password
again. If the user code is lost, contact the
After Sales Service.
P W D O F F / O N :
A c t i v a t i n g /
Deactivating the security code
When the unit is switched on, press the
"SEL" button several times to select "PWD
OFF" (ON) and turn the "VOLUME" knob
to select "ON" or "OFF": the password
is activated or deactivated. When set to
"ON", the radio code will be requested if
you have disconnected the per
(B + battery), you will have to enter the
password after each time the battery is
disconnected (the default password is
"1234"). If you only turn off the ignition
(+15/30), the code will not be requested.
PWD NEW:
Create a new password
You can set a new password for the unit:
press the "SEL" button several times
to select "PWD >OLD", enter your old
password, press the "SEL" button at least
2 seconds to confirm. If the old password is
incorrect,"ERROR" appears on the display,
please enter the password again. If the old
password is correctly entered, "NEW" is
displayed, enter your new password, press
the "SEL" button at least 2 seconds to
confirm. "AGN" is displayed, enter your new
password again and press the "SEL" button
at least 2 seconds to confirm; "SET OK" is
displayed: the code has been updated.
HOW TO PROCEED TO CHANGE
THE RECEPTION AREA ON CT412
(Europe / Japan / USA / LATIN (South
America) / Australia )
> Switch on the radio on FM tuner mode
> you must see 87.5 MHz on the radio
display
> Press simultaneously on both “Memory 5”
button and the ‘”forward key(>> )“
> “Fstop xx” appears on the display
NB : Please do not modify the value (Fstop
Lstop Mstop Ostop), it would change the
settings of the tuner selectivity.
> Press repeatedly the "SEL" button until
“EUROPE” appears on the display
> Once selected, rotate the Volume button to
choose your Band Europe/Japan/USA/Latin/
Austra
(LATIN/AUSTRA since version V1.55)
> Once your Band is selected, the unit will
come back to the normal functioning mode
“FM tuning” after a few seconds.
NB : the radio will delete the preselected
station memory
Timer function:
If the device is switched on while the
ignition is on, it then switches off and on
again automatically with the ignition. This is
provided that the A7 contact is connected to
the terminal 15 of the vehicle. If the device is
switched on without the ignition by pressing
"POWER", it switches off again after 120
minutes to save the battery. The device can
then be switched on again with "POWER".
Caution : When the radio is switched on, the
automatic antenna extends.
Therefore always switch off the device when
the situation requires it (e.g. in a station car
wash).