AlcoEasy A65– Alcohol analyzer –Operating manual
7.2
Passive mode
The purpose of the passive mode is for detection of the alcohol in ambient.
This mode didn't serve as an accurate measurement. The value measured only indicates
that there is alcohol in air. Only active mode will have an accurate reading.
In Passive Mode, display will show “Sampling”, put the device close enough to the nose or
mouth to the tester, request they blow direct to the device and press “Start” button, the
device will sample and analyzed.
Main menu
17 31
:
01- 08
Active mode
1
OK
Settings
4
Results
3
Passive mode
2
17 31
:
01- 08
Sampling
2 Passive mode
Start
Notice:
No need to use mouthpieces during passive mode.
Put the device close enough to the nose or mouth to the tester, press “Start” button, the
device will sample and analyzed, and the result will be shown on the screen, meanwhile
the indicate light is on. The result is shown as below.
17 31
:
01- 08
BAC
Alcohol
No.
Date:
Time:
CN
PN
LN
:
:
:
:
00012
2016.01.08
17:31
2 Passive mode
17 31
:
01- 08
BAC
No Alcohol
No.
Date:
Time:
CN
PN
LN
:
:
:
:
00012
2016.01.08
17:31
2 Passive mode
Red indicator light Green indicator light
7.3
Results
The history Data is stored, including history testing results, date and time, record no..
The user can find every measurement in this menu.
The last value measured can be seen on the display, when you press “Ok”button.
