Amron 2830R/24 Series, Руководство пользователя

Страница: 14 / 45

2830R THREE DIVER COMMUNICATOR USER MANUAL
2830R-UM REV 5.0
10
SPEAKER unless the PUSH-TO-TALK BUTTON or PUSH-TO-TALK JACK is
activated.
4.4.2
Diver Earphone
–
This is a dual 5-way binding post jack (color-coded black) that
functions as the output for the diver's earphone. It is only used when the diver is in
Full Duplex (4-Wire) mode.
4.5
Other Connections
4.5.1
External Power Connector
–
The 2830R/24 uses a standard IEC C14 power
inlet located on the rear of the chassis. The communicator has a universal input
with a voltage range of 90-264 VRMS and a frequency range of 47-440 Hz. No
user adjustment is required.
4.5.2
Recorder Output
–
This is a single RCA Phono jack (color-coded black) located
on the rear of the chassis. It provides a transformer isolated signal of both the diver
and tender communications. It is designed to drive the standard line-level inputs of
audio or video recorders with input impedances as low as 600 Ohms.
4.5.3
MS Connector
–
A Military Series (MS) connector is located on the rear of the
chassis providing connections for both the Tender and Divers. This allows
connection without running wires to the front panel. The mating connector part
number is MS-3106A-28-16P. The pin functions are shown in the following table:
MS CONNECTOR PIN OUT IDENTIFICATIONS
PIN NUMBER FUNCTION
A & B DIVER 1 MICROPHONE
G & E DIVER 1 EARPHONE
L & M DIVER 2 MICROPHONE
H & F DIVER 2 HEADPHONE
S & K DIVER 3 MICROPHONE
U & V DIVER 3 EARPHONE
J & T TENDER MICROPHONE
Q & P TENDER EARPHONE
D & N RECORDER OUTPUT
R PUSH-TO-TALK
C COMMON
4.6
Option Controls: Call Indicator
–
4002
The call indicator lights are located in the STATUS panel on the far right side of the front
panel. This option can be purchased with HSU and Wireless Tender Options.
4.6.1
Lock Indicator
–
LED Lamp indicates a call originating from a lock. Lamps are
provided for each lock.
4.6.2
Call Annunciator
–
Alerts the operator of a call.