Amron 2810E, Руководство пользователя

Страница: 13 / 43

MODEL 2810E USER MANUAL
2810E UM REV 7.0
9
4.2.3 PUSH-TO-TALK JACK - This is a dual banana jack (color-coded yellow) that
allows for remote keying of the push-to-talk function of the 2810E. The difference
between using the PUSH-TO-TALK JACK and PUSH-TO-TALK BUTTON is that
the button allows the tender to communicate using the PANEL SPEAKER as a
microphone. If both are used at the same time, the PANEL SPEAKER is active as
a microphone. This allows a crew member to talk to the diver using the PANEL
SPEAKER even if the tender is away from the 2810E using the Remote Push-to-
Talk Module in 2-Wire mode.
DIVER CONNECTIONS 4.3
The diver connections are located on the left side of the communicator.
4.3.1 DIVER MICROPHONE - This is a dual 5-way binding post jack (color-coded red)
that functions as both an output (earphone) and input (microphone) for the diver as
controlled by the PUSH-TO-TALK BUTTON and PUSH-TO-TALK JACK. Using this
connection, the diver can be wired in either 2-Wire or Full Duplex (4-Wire) mode
regardless of the mode used for the diver.
To connect the diver in Full Duplex (4-Wire) mode, connect the diver microphone
to this jack and the diver earphone the DIVER EARPHONE jack as shown in the
wiring diagram in section 3.6. The diver can use this mode even if the tender is
wired in 2-Wire mode.
To connect the diver in 2-Wire mode, connect both the diver microphone and
earphone to this jack. If the diver umbilical uses banana plugs, simply stack both
plugs into this jack as shown in the wiring diagram in section 3.5. In this mode, the
diver microphone will be active and heard on tender headset and/or PANEL