come back later to revise this selection if no
appropriate usergroup could be chosen for now.
Step 3: Choose Device
Based on the devices you have, click
ADD IP PHONE
or
ADD ANALOG PHONE
, and
Next
to add/set
the device.
Note:
If selecting
ADD ANALOG PHONE
, the wizard will skip to Step 5.
Step 4: Add Device
1.
Enter a device name in the
Device ID
box.
2.
Select
Auto Provision
if you want to enable Automatic Client Configuration.
3.
Click
Add
to see the newly added device in the table of the webpage, or to see the Enable
Automatic Client Configuration (ACC) page if
Auto Provision
is selected.
Enter settings shown in Table 3 -3 ACC (Automatic Client Configuration) Settings and click
Enable
.
Note:
Consult with your vendor to make sure your SIP phone support Auto Provision function.
For deleting a device, select a device ID and click
Del
.
Note:
Make sure there is no extension associate with the device, or it cannot be deleted.
Click
Next
to set a device.
Table 3-3 ACC (Automatic Client Configuration) Settings
Field
Description
Vendor Prefix
Ask your IP Phone vendor for the Prefix. e.g. eip7012.
MAC Address
MAC address of the device.
Supplementary Configuration
Supplementary configuration files for IP Phone. The file name
must start with “psc-“.
Codec Preference
Preference order of supported codec and packet times of the
phone.
Enable
Voice
Activity
Detection (VAD)
VAD is a technique that detects absence of audio and
conserves bandwidth by preventing the transmission of
"silent packets" over the network.
10
