Amroad DP3211, Руководство по установке, Страница: 13 / 15

AMROAD DP3211
10
Regulations and Safety Precautions
FCC Statement
This product has been tested for compliance
with FCC Regulations Part 15, Specifications of
Class B Digital Devices. These limitations
provide reasonable protection against harmful
EMI caused by residential installations. This
product may generate and radiate energy in
the radio frequency; harmful interference to
radio communication may occur if not
installed or used in accordance with safety
regulations. However, this does not assure
that specific installation will not cause
interference; in case of interferences to the
radio or TV reception in the residence while
this product is switched on or off, the user may
try the following adjustment methods to
improve the EMI situation:
 Adjust direction and location of the
antenna

Increase distance between the receiving
antenna and this product.
 Do not use the product on the same
power socket used by the receiving
antenna.
FCC Radiation Exposure Statement
This product is in compliance with FCC’s
Radiation Exposure Limitations for
uncontrolled environment. While installing
and operating this product, the radiation
transmitter must be kept away from human
body at distance of at least 20cm.
EC Directive Compliance Statement
Manufacturer claims that this product
complies with basic requirements specified in
statutory regulations in relation to health,
safety and environmental protection. The
following regulations are set forth based on
European R&TTE - European Radio equipment
and Telecommunications Terminal
Equipment – 1999/5/EC.
 EN 301 489-1, 301 489-17, addressing EMC
requirements of general radio frequency
devices
 EN 609 50 Safety EN 609 50 Safety
Specifications
 EN 300-328-1, EN 300-328-2, addressing
technical requirements of radio
frequency devices.
NOTE
：
This device is applicable in member countries
of EU and EFTA. Outdoor operation is limited
to specific radio frequencies or requirements
only. Please consult local authorities for
application procedures.
It is deemed not in conformity with the above
specification, and the product is not allowed to
be used in the EU Community or European
country where R&TTE directive 1999/5/EC is in
force, if the intensity of the overall radiated
power and/or antenna exceeds 100 mW EIRP
(Equivalent Isotropic Radiated Power).
Regulations and Safety Precautions