Amroad DP3210, Техническое руководство

Страница: 24 / 28

AMROAD DP3210
Regulations and Safety Precaution
FCC Statement
This product has been tested for compliance
with FCC Regulations Part 15, Specifications of
Class B Digital Devices. These limitations
provide reasonable protection against harmful
EMI caused by residential installations. This
product may generate and radiate energy in the
radio frequency; harmful interference to radio
communication may occur if not installed or
used in accordance with safety regulations.
However, this does not assure that specific
installation will not cause interference; in case
of interferences to the radio or TV reception in
the residence while this product is switched on
or off, the user may try the following
adjustment methods to improve the EMI
situation:

Adjust direction and location of the
antenna.
 Increase distance between the receiving
antenna and this product.
 Do not use the product on the same
power socket used by the receiving
antenna.
 Consult the experienced distributors or
radio/TV technicians.
FCC Radiation Exposure Statement
This product is in compliance with FCC’s
Radiation Exposure Limitations for
uncontrolled environment. While installing and
operating this product, the radiation
transmitter must be kept away from human
body at distance of at least 20cm.
EC Directive Compliance Statement
Manufacturer claims that this product
complies with basic requirements specified in
statutory regulations in relation to health,
safety and environmental protection. The
following regulations are set forth based on
European R&TTE - European Radio equipment
and Telecommunications Terminal Equipment –
1999/5/EC.
 EN 301 489-1, 301 489-17, addressing EMC
requirements of general radio frequency
devices
 EN 609 50 Safety EN 609 50 Safety
Specifications
 EN 300-328-1, EN 300-328-2, addressing
technical requirements of radio frequency
devices.
Note: This device is applicable in member
countries of EU and EFTA. Outdoor operation is
limited to specific radio frequencies or
requirements only. Please consult local
authorities for application procedures.
It is deemed not in conformity with the above
specification, and the product is not allowed to
be used in the EU Community or European
country where R&TTE directive 1999/5/EC is in
force, if the intensity of the overall radiated
power and/or antenna exceeds 100 mW EIRP
(Equivalent Isotropic Radiated Power).
Regulations and Safety Precautions
21