Amroad DP101R, Руководство по установке

Страница: 7 / 16

AMROAD DP101R
Installing Procedures
Back Plate
1. Make sure that is able to let the AC wires,
Ethernet cable, and Earth Wire pass
through the hole. The bottom of standard
wall box is height 138cm from the floor.
2. Sets up Back Plate in accordance with the
figure above.
3. Use Wall Mounted Screw Pack to fix Back
Plate on the wall.
4. Connect the ground wire to the Back Plate.
Remember to tighten the screws on both
sides. In order to prevent power surge and
lighting strike from damaging the device,
the Back Plate should be connected to the
earth wire of the building.
Installing Procedures
Back Plate
4