Amrel Rocky DS11, Руководство пользователя

Страница: 24 / 82

Chapter Two - 11
Operating Information
Working with Power Button (Heater Kit)
DS11 M-model is equipped with a heater kit to enable work under low temperature. The
heater will heat up the LCD to the temperature for booting up the system. Also, the heater
will constantly monitor LCD temperature. Once the temperature becomes lower, the heater
will heat up again to maintain the temperature for operation.
Note:

When ambient temperature is under 5 °F (-15 °C) (the default setting for your tablet
computer), the system may not boot up immediately. System will beep with Heater
LED light flashing orange to indicate that the heater is in operation. After 3~10 minutes
(depending on the ambient temperature), the system will boot up automatically.

In emergency situations, you can skip the heating process by pressing and holding the
power button for 9~11 seconds then release. The speaker will beep with a special
sound to signify that the heating process has been skipped (Please note that not all
devices are guaranteed to work properly in this case).

Press the power button again during the heating process will shut down the computer.
The following is a list of functions associated with your tablet computer’s power button:
1. Press and hold for 9 ~ 11 seconds:
The system will skip heating process and force boot up.
2. Press and hold for 5 ~ 8 seconds:
Enable/Disable the sound of Heater.
3. Press and hold the power button for 4 seconds under OS:
Shut down the system.
4. Press the power button for functions including:
a. Power on the system.
b. Force Shut Down.
c. Sleep/Hibernate (Dependent on OS settings).