15
R7. INPUTS 2-5
: RCA inputs, for signal input of source equipment.
R8. SYNC connectors
: for connection of more than one AM-77.
R9. RS232 option connector
: to facilitate future upgrades*.
R10. Infra-Red Link
: for connection of a wireline remote control.
R11. IEC power connector
: for the connection of a mains power cable to the AM-77.
R12. POWER
: rocker switch to power on/off mains electricity to the AM-77.
In the majority of audio systems, the AM-77 is most likely to be operated as a Pre-Main Amplifier: please inspect
the rear panel of the AM-77 to verify that the default settings (in bold) to enable the AM-77 to operate in this mode
are as follows:
-
HIFI/PRO switch
(R3) is set to ‘HiFi’ (set to left position)
-
INT/POWER switch
(R4) switch is set to ‘Int’ (set to right position)
-
MODE switch
(R5) is set to ‘LR’ (set to middle position)
* Please refer to Sections 3 - 5 for a more detailed explanation.
Содержание AM-77
