AmQRP AA-908, Инструкция по сборке

Страница: 4 / 37

Micro908 Antenna Analyst “Assembly Manual”, v2 4 Copyright 2004, G. Heron, N2APB
Controls & Connectors Bag
1 J1 BNC, pcb mount
1 J2 Serial port connector, DB9F
1 ENC Rotary Encoder
1 J4 Coaxial pow er connector, 2.1mm
1 J8 Socket, 1x12 pos'n (DSP out)
1 J9 Socket, 2x10 position, (DSP in)
1 J11 Mini-DIN, 6 pos'n (KBD)
3 J6, J7, J12 Audio jack, 1/8", pcb mount
1 J10 Socket, 1x8 pos'n, right angle
1 J14 Mini-Din, 8 pos'n (AUX)
1 W1 Jumper, Flexstrip, (LCD)
2 P1, P2 Pinheader, 2x34 (HC908) (cut 2 from 2x72 strip)
2 P3, P4 Pinheader, 1x2 pos'n (MON) (cut from 2x72 strip)
3 C7, C33, C34 Capacitor, 1 uF, Electrolytic, SMT
2 C5, C26 Capacitor, 10 uF, Electrolytic
1 C27 Capacitor, 47 uF, Electrolytic
1 C24 Capacitor, 100 uF, Electrolytic
1 R45 Potentiometer, 10K, miniature, pcb mount
1 S2 Slide sw itch, pcb mount, SPST
5 PB1, PB2, PB3, PB4, PB5 Pushbuttons, SPST, momentary contact
1 SPKR Speaker, miniature, 32-ohm
5 Pushbutton caps (black)
1 Heatsink - TO220
1 Knob, 1/4"-dia shaft, (ENC)
1 Nut, zinc plated, 4-40 (U1)
1 Machine screw , zinc plated, round head, 4-40 x 0.5" (U1)
4 Spacer, nylon, hex tapped, 4-40x0.25" (LCD)
6 Spacer, nylon, hex tapped, 4-40x0.375" (PCB+DDS)
16 Machine screw , pan slotted, #4-40x0.25" (PCB+DDS+LCD)
4 Machine screw , flat slotted, #4-40x0.25" (PCB-cover)
1 Desoldering Braid
1 Solder, 63/37 Eutectic, No-Clean Flux, @28 ga.
Overlay Bag (Included with Enclosure Option)
1 Front panel overlay
1 Side panel overlay
1 End panel overlay
1 End panel (drilled)
1 End panel (undrilled)
4 Enclosure screw s
4
Enclosure rubber feet
Battery Holder Bag
1 LCD Display, LCD, Hantronix, 16x2 STN, GRAY
1 J3 Battery holder, 8-AA cells
1 Flux Pen, No-Clean