AMQ Amobi Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 33

AMQ Amobi Скачать руководство пользователя страница 4

AMOBI DESK

INSTALLATION GUIDE | 4

amqsolutions.com

This device complies with part 15 of the FCC rules . Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation .
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules . These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment . This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to
radio communications . Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense .

Important: Changes or modifications to this product not authorized by AMQ could void your authority
to operate the product.

«
...
2
3
4
5
6
...
»

Содержание Amobi


































Отзывы:

Нет отзывов