TM
good tone comes from tweaking . . .
Amptweaker, LLC, P.O. Box 387, Batavia, OH 45103
handmade in USA
www.amptweaker.com
©2010 Amptweaker, LLC
Other Tips & Tricks:
• Effects like compressors, treble boosters, octavers, or
distortion tend to work best with the Effects Loop set to Pre.
• Effects like delay, reverb, EQ, chorus, vibe/tremolo, and
most others tend to sound best with the Loop set to Post.
• Add an overdrive/distortion pedal in the Effects Loop (set to
Post) to give the overdrive even more distortion!
• Add an overdrive/distortion pedal in the Effects Loop (set to
Pre) to give more output level to the distortion.
• By using lower Boost and Mid settings, the Tight control can
be used to tighten up your attack without boosting.
• For the most Wah boost, turn the High down and the Tight
up while cranking the Mid-Wah boost.
• Select Pre/Effects Send to use it as a switchable
ʻ
clean
ʼ
send to another effects chain, tuner input or amp.
• Select Post/Effects Send to send to some other amp
AFTER the TightBoost for a big stereo solo tone.
• When using extremely high settings on the Tight control,
you might need to increase your amp
ʼ
s bass control.
• With the Mid-Wah cranked, and its Frequency switch to the
left, try turning the High down for a really nice
ʻ
woman
ʼ
tone.
