Volume
– Master volume
Tone
- Adjusts highs up and down to balance with
lows. 12 o’clock is neutral.
Gain
- Adjusts distortion. Set lower for vintage rock
tones, higher for modern, heavier tones.
EQ Switch
– Select tone stack. Smooth warms high
end.
Noise Gate
– Turn up to reduce hum and/or noise.
Tight Switch
– Tight for aggressive, chunky attack.
Fat for a thicker “singing” distortion tone.
DC Jack
– 9-18V, for 50W to 100W amp tone. Use
(-) center negative pin. (Power adapter not included)
Tight Rock Controls
www.amptweaker.com
Specifications
Input Impedance
: 250K Ohm (with effect on)
Output Impedance
: 1K Ohm (with effect on)
Current Draw
: 13mA at 9V, 15mA at 18V
Adapter
: 9-18VDC adapter w/5.5mm X 2.1
mm positive barrel, center ground negative (-)
Dimensions
: 1.5” H, 2.5” W, 4.5” D
Made in USA
