AMPTRON 3IBAT, Руководство пользователя

Страница: 47 / 62

47
3IBAT User’s Manual
3-7 PNP/PCI CONFIGURATION
This section describes configuring the PCI bus system. PCI, or Personal
Computer Interconnect, is a system which allows I/O devices to operate at
speeds nearing the speed the CPU itself uses when communicating with its
own special components. This section covers some very technical items
and it is strongly recommended that only experienced users should make
any changes to the default settings.
PNP OS Installed
Select Yes if the system operating environment is Plug-and-Play aware
(e.g., Windows 95).
The Choice: Yes , No.
Resource Controlled by
The Award Plug and Play BIOS can automatically configure all the boot and
Plug and Play-compatible devices. If you select Auto, all the interrupt re-
quest (IRQ) and DMA assignment fields disappear, as the BIOS automati-
cally assigns them.
The choice: Auto and Manual.
Reset Configuration Data
Normally, you leave this field Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have in-