10
Non-Warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe
Test Tools distributor for a nominal
charge. Please check the “Where to Buy” section on
www.amprobe.com
for a list of distributors near
you.
European Correspondence Address*
Amprobe
Test Tools Europe
P.O. Box 1186
5602 BD Eindhoven
The
Netherlands
*(Correspondence only – no repair or replacement available from this address. European customers
please contact your distributor).
Specifications
General Specifications
Display and Update Rate:
3-5/6 digits 6000 counts; Updates 5 per second
nominal
Operating Temperature:
0
°
C - 40
°
C
Operating Relative Humidity:
Maximum 80% R.H. up to 31
°
C, decreasing linearly to
50% R.H. at 40
°
C
Altitude:
Operation below 2000 m
Storage Temperature:
-20
°
C ~ 60
°
C, < 80% R.H. (with battery removed)
Temperature Coefficient:
Nominal 0.15 x (specified accuracy)/
°
C @
(0
°
C ~ 18
°
C or 28
°
C ~ 40
°
C), or otherwise specified
Sensing:
Average sensing
Overload Protection:
450 V dc and V ac rms
Low Battery:
Below approx. 2.4 V
Power Supply:
3 V standard button battery x 1 (IEC-CR2032; ANSI-NEDA-5004LC)
Power Consumption (typical):
2 mA
APO Consumption (typical):
2.2 µA
APO Timing:
Idle for 3 minutes
Dimension / Weight
L 113 mm x W 53 mm x H 10.2 mm / Approx. 78 gm
Special Features
AutoTect
(Automatic V and
Ω
selection) and VolTect
(Electric Field Detection)