Amprobe CT-53 Скачать руководство пользователя страница 4

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and workmanship for one 
year from the date of purchase unless local laws require otherwise. This warranty does 
not cover fuses, disposable batteries or damage from accident, neglect, misuse, alteration, 
contamination, or abnormal conditions of operation or handling. Resellers are not 
authorized to extend any other warranty on the behalf of Amprobe. To obtain service 
during the warranty period, return the product with proof of purchase to an authorized 
Amprobe Service Center or to an Amprobe dealer or distributor. See Repair Section for 
details. THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER 
EXPRESS, IMPLIED OR STATUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A 
PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER 
SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL 
DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since some states or 
countries do not allow the exclusion or limitation of an implied warranty or of incidental or 
consequential damages, this limitation of liability may not apply to you.

Repair

All Amprobe returned for warranty or non-warranty repair or for calibration should be 
accompanied by the following: your name, company’s name, address, telephone number, 
and proof of purchase. Additionally, please include a brief description of the problem or 
the service requested and include the test leads with the meter. Non-warranty repair or 
replacement charges should be remitted in the form of a check, a money order, credit 
card with expiration date, or a purchase order made payable to Amprobe.

In-warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting repair. 
During the warranty period, any defective test tool can be returned to your Amprobe 
distributor for an exchange for the same or like product. Please check the “Where to 
Buy” section on www.Amprobe.com for a list of distributors near you. Additionally, in the 
United States and Canada, in-warranty repair and replacement units can also be sent to an 
Amprobe Service Center (see address below).

Non-warranty Repairs and Replacement – United States and Canada

Non-warranty repairs in the United States and Canada should be sent to an Amprobe Service 
Center. Call Amprobe or inquire at your point of purchase for current repair and replacement 
rates.

USA:  

Canada:

Amprobe Amprobe
Everett, WA 98203  

Mississauga, ON L4Z 1X9

Tel: 888-993-5853  

Tel: 905-890-7600

Fax: 425-446-6390 

Fax: 905-890-6866

Содержание CT-53















Отзывы: