Amprobe AMP-25 Скачать руководство пользователя страница 4

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and workmanship 
for one year from the date of purchase unless local laws require otherwise. This 
warranty does not cover fuses, disposable batteries or damage from accident, 
neglect, misuse, alteration, contamination, or abnormal conditions of operation 
or handling. Resellers are not authorized to extend any other warranty on 
the behalf of Amprobe. To obtain service during the warranty period, return 
the product with proof of purchase to an authorized Amprobe Service Center 
or to an Amprobe dealer or distributor. See Repair Section for details. THIS 
WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER 
EXPRESS, IMPLIED OR STATUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS 
FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY DISCLAIMED. 
MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL 
OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR 
THEORY. Since some states or countries do not allow the exclusion or limitation of 
an implied warranty or of incidental or consequential damages, this limitation of 
liability may not apply to you.

Repair

All Amprobe returned for warranty or non-warranty repair or for calibration 
should be accompanied by the following: your name, company’s name, address, 
telephone number, and proof of purchase. Additionally, please include a brief 
description of the problem or the service requested and include the test leads with 
the meter. Non-warranty repair or replacement charges should be remitted in the 
form of a check, a money order, credit card with expiration date, or a purchase 
order made payable to Amprobe.

In-warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting 
repair. During the warranty period, any defective test tool can be returned to 
your Amprobe distributor for an exchange for the same or like product. Please 
check the “Where to Buy” section on www.Amprobe.com for a list of distributors 
near you. Additionally, in the United States and Canada, in-warranty repair and 
replacement units can also be sent to an Amprobe Service Center (see address 
below).

Non-warranty Repairs and Replacement – United States and Canada

Non-warranty repairs in the United States and Canada should be sent to an 
Amprobe Service Center. Call Amprobe or inquire at your point of purchase for 
current repair and replacement rates.

USA:  

Canada:

Amprobe Amprobe
Everett, WA 98203  

Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623)  

Tel: 905-890-7600

Non-warranty Repairs and Replacement – Europe

European non-warranty units can be replaced by your Amprobe distributor for a 
nominal charge. Please check the “Where to Buy” section on www.Amprobe.eu 
for a list of distributors near you.

Amprobe Europe*
Beha-Amprobe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
www.Amprobe.eu
*(Correspondence only – no repair or replacement available from this address. 
European customers please contact your distributor.)

Содержание AMP-25























Отзывы: