Ampro TECShow Beamer 230, Руководство пользователя

Страница: 3 / 26

P. 3
| Tecshow Beamer 230
English version
This device has left the factory in perfect condition.
In order to maintain this condition and to ensure
a safe operation, it is absolutely necessary for the
user to follow the safety instructions and warning
notes written in this user manual.
Safety Instructions
• If the device has been exposed to temperature
changes due to environmental changes, do
not switch it on immediately. The arising
condensation could damage the device. Leave
the device switched off until it has reached
room temperature.
• This device falls under protection-class I.
Therefore it is essential that the device be
earthed.
• The electric connection must carry out by
qualified person.
• The device shall only be used with rate voltage
and frequency.
• Make sure that the available voltage is not
higher than stated at the end of this manual.
• Make sure the power cord is never crimped or
damaged by sharp edges. If this would be the
case, replacement of the cable must be done by
an authorized dealer.
• Always disconnect from the mains, when the
device is not in use or before cleaning it. Only
handle the power cord by the plug. Never pull
out the plug by tugging the power cord.
• During initial start-up some smoke or smell
may arise. This is a normal process and
does not necessarily mean that the device is
defective, it should decrease gradually.
• Please don't project the beam onto
combustible substances.
• Fixtures cannot be installed on combustible
substances, keep more than 50cm distance
with wall for smooth air flow, so there should
be no shelter for fans and ventilation for heat
radiation.
• If the external flexible cable or cord of this
luminaire is damaged, it shall be exclusively
replaced by the manufacturer or his service
agent or a similar qualified person in order to
avoid a hazard.
2. SAFETY INSTRUCTIONS
Becareful with your operations.
With a dangerous voltage you
cansuffer a dangerous electric
shock when touching wires!
CAUTION!
Damages caused by the disregard
of this user manual are not subject
to warranty. The dealer will not
accept liability for any resulting
defects or problems.
IMPORTANT