Ampro P/N 5001795A REV A, Руководство пользователя

Страница: 5 / 20

ReadyPanel User’s Guide 1
Chapter 1 ReadyPanel Setup
About the ReadyPanel
The ReadyPanel products are intended for users of turn-key embedded systems who prefer long life cycle,
configuration controlled computers over desktop grade systems with frequently changing motherboards.
ReadyPanel models feature the ReadyBoard single board computer (SBC), with a range of processors from
the Intel Celeron
®
M CPU to the Intel Pentium
®
M CPU, and a range of SODIMMs described in the
reference manual of each ReadyBoard product. The desired operating system (OS) is pre-loaded onto the
internal compact flash card. Just load your application software and you are ready to use your system
applications.
Using this Guide
This guide provides the most efficient way to set up your ReadyPanel with your desired operating system
(OS). The instructions provided in this guide include:
•
Removing the ReadyPanel from the shipping container and inspecting the accessories
•
Connecting peripherals to the ReadyPanel
•
Powering up the ReadyPanel
Information not provided in this User’s Guide includes:
•
ReadyBoard specifications
•
Environmental requirements
•
ReadyBoard connector/pin numbers and definitions
•
Operating system programming or operating instructions
Requirements
The following peripherals and devices are needed to make full use of the ReadyPanel.
•
Peripherals (customer provided):
♦
PS/2 keyboard and PS/2 mouse - optional
♦
CRT or LCD monitor (VGA) - optional
•
Power Supply (customer supplied):
♦
ATX, AT, or Dual Voltage Lab power supply (+5VDC to +12VDC)
•
Optional device/Peripheral connections:
♦
Ethernet (LAN) connection
♦
USB device connections
NOTE
Refer to Ampro’s Linux OS manual or other OS manufacturers’ manuals for
instructions when using OS software.
CAUTION Using a power supply with a higher voltage will damage the system.