manualshive.com logo in svg

Ampro MightyBoard 821, Справочное руководство

Поделиться
Скачать
Ampro MightyBoard 821 Скачать руководство пользователя страница 36

Chapter 4

BIOS Setup

32

Reference Manual

MightyBoard 821

8. Restore power to the MightyBoard 821 and look for the screen prompt shown below.

Hit ^C if you want to run SETUP

9. Press the F4 key to enter Setup (early in the boot sequence if 

Quick Boot

 is set to [Enabled].)

If 

Quick Boot

 is set to [Enabled], you may never see the screen prompt.

10. Use the <Enter> key to select the screen menus listed in the Opening BIOS screen.

Logo screen 

The MightyBoard 821 BIOS supports a graphical logo screen, which can be customized by the user and 
displayed when enabled through the BIOS Setup Utility. The graphical image can be a company logo or any 

custom image the user wants to display during the boot process. The custom image can be displayed as the 

first image displayed on screen during the boot process and remain there, depending on the options selected 
in BIOS Setup, while the OS boots. 

Logo Screen Image Requirements

The user’s image may be customized with any image editing tool, and the system will automatically convert 

the image into an acceptable format to the tools (files and utilities) provided by Ampro. The 

MightyBoard 821 Logo Screen utility supports the following image formats:

•

Bitmap image 

♦

16-Color, 640x480 pixels

♦

256-Color, 640x480 pixels

•

JPG image

♦

16-Color, 640x480 pixels

♦

256-Color, 800x600 pixels

♦

256-Color, 1024x768 pixels

•

PCX image

♦

256-Color, 640x480 pixels

•

A file size of not greater than 40kB

NOTE

The serial console port is not hardware protected. Diagnostic software that 
probes hardware addresses may cause a loss or failure of the serial console 
functions.

NOTE

For procedures on loading custom images, see the logo screen utility 
document available on the Ampro website. 

Содержание MightyBoard 821







































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды