MightyMic Pro User Manual
3
Pairing to an IOS or Android device
To use your Bluetooth Microphone, you must first pair it with a device. Once your
Bluetooth Microphone is paired to a specific device, they will remain paired while they
are within range.
Pairing Instructions:
● Turn on your Phone or device and insure the Bluetooth function is activated
● Hold the “MF” button on the front of the microphone until the blue/red LED’s begins
to flash
● In the Settings App on the device select the Bluetooth option. Look for a Bluetooth
device listed as “MightyMic Pro” to pair it to the Microphone
● The display should change from “Not Paired” to “Connected. If not, tap the device
listed to pair
● If you have paired before you may just need to touch the “MightyMic Pro” device to
reconnect or it may connect Automatically
Using the MightyMic Pro Microphone
For best results use in an open space without any barriers between the
microphone and the phone. People especially can cause interference.
We highly recommend you set your phone to airplane mode with Bluetooth
enabled otherwise you may have recordings interrupted by unwanted calls
To hear playback audio while the Bluetooth microphone is paired connect
headphones to the microphone or turn off Bluetooth to listen through the phone.
For IOS devices, open the Control Center and select the airplay button to
manually choose the desired playback option.
Pause
Press the “MF” button to pause the music
Volume Up
Hold down the “+” button to increase the volume
Volume Down
Hold down the “-” button to decrease the volume
Next Track
Quickly press the “+” button to move to the next track
Previous Track
Quickly press the “-” button to move to the previous track
Music Functions
Using the Monitor Function
Many Apps support audio monitoring while recording. Connect headphones to the
3.5mm jack on the MightyMic Pro or into the monitor jack on the microphone to hear
sounds returned from the App. Due to transmission functions there will be some delay
of the monitor signal. This delay will not occur on the recording.