5
TOP PANEL
SIDE PANEL
M
K
E
L
Power ON / OFF Switch and Volume Control
B
Rotate the dial in the direction of the word “ON” (+).
The “
BLUE
” LED
C
and “
YELLOW
” LED
D
will light to show
that the amplifier is “ON”. You can now pair the amplifier with the
headset by turning on the headset. Headset will automatically
pair. The headset
GREEN
LED should be ON and not flashing.
Place headset on your head and speak into microphone. Adjust
volume.
MP3 Slots—USB / Mini SD Card (TF)
E F
Insert your Mini SD (TF) card or USB thumb drive into the appro-
priate slot / connector. “
BLUE
” LED will start to flash and start to
play program material.
Press
G
to
STOP / PAUSE / PLAY
program material.
Press
H
to
Advance
to the next program material.
Press
I
to
Go Back
to previous program material.
Press (short) “
M
” Mode
J
to select between
USB / TF (Mini
SD) / AUX
. Press and
HOLD
to start a LOOP (continuous) of
program material.
Charging Amplifier
Insert the barrel connector of the AC adapter into the DC 9V charging
jack
K
of amplifier. Plug the AC adapter and into electrical outlet. The
RED LED
L
will light and start to flash.
Audio Input (AUX)
This 1/8
"
(3.5mm) input connector
M
can be used for connecting to
other devices such as cell phone, computer, or MP3/MP4 player.
Wired Microphone
This 1/8
"
(3.5mm) input connector
N
can be used for connecting a
wired microphone. Both microphones can be used at the same time.
B
D
C
N
F
G
H
J
I
OPERATION
