Compliance
FCC
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions.
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Operations of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
The AmpliFi Router and Extenders have been approved by FCC under FCC ID: SWX‑AFR (for Router); FCC ID SWX‑AFE
(for Extenders)
CAN ICES-3(B)/NMB-3(B)
This Class B digital apparatus complies with Canadian CAN ICES‑003.
To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the
equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.
This device complies with Industry Canada licence‑exempt RSS standard(s). Operation is subject to the following
two conditions:
1 This device may not cause interference, and
2 This device must accept any interference, including interference that may cause undesired operation of the
device.
The AmpliFi Router and Extenders have been approved by Industry Canada under IC: 6545A‑AFR (for Router); IC:
6545A‑AFE (for Extenders). The device for the band 5150‑5250 MHz is only for indoor usage to reduce potential for
harmful interference to co‑channel mobile satellite systems.
CAN ICES-3(B)/NMB-3(B)
Cet appareil numérique de la classe B est conforme à la norme NMB‑003 du Canada.
Pour réduire le risque d’interférence aux autres utilisateurs, le type d’antenne et son gain doivent être choisies
de façon que la puissance isotrope rayonnée équivalente (PIRE) ne dépasse pas ce qui est nécessaire pour une
communication réussie.
Cet appareil est conforme à la norme RSS Industrie Canada exempts de licence norme(s). Son fonctionnement est
soumis aux deux conditions suivantes:
1 Cet appareil ne peut pas provoquer d’interférences et
2 Cet appareil doit accepter toute interférence, y compris les interférences qui peuvent causer un mauvais
fonctionnement du dispositif.
Le AMPLIFI Router et Extenders ont été approuvés par Industrie Canada en vertu IC : 6545A ‑AFR ( pour le routeur ) ; IC
: 6545A ‑ AFE (pour Extenders ) . Les dispositifs fonctionnant dans la bande 5150‑5250 MHz sont réservés uniquement
pour une utilisation à l’intérieur afin de réduire les risques de brouillage préjudiciable aux systèmes de satellites
mobiles utilisant les mêmes canaux.
RF Exposure Warning
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all
persons and must not be located or operating in conjunction with any other antenna or transmitter.
Les antennes utilisées pour ce transmetteur doivent être installé en considérant une distance de séparation de
toute personnes d’au moins 20 cm et ne doivent pas être localisé ou utilisé en conflit avec tout autre antenne ou
transmetteur.