manualshive.com logo in svg

Amplicon NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q, Руководство пользователя

Поделиться
Скачать
Amplicon NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q Скачать руководство пользователя страница 48

Appendix A

Specifications

Safety

This product is designed to meet the requirements of the following 
standards of safety for information technology equipment:

•

IEC 61010-1, EN 61010-1

•

UL 61010-1, CSA 61010-1

Note

For UL and other safety certifications, refer to the product label or the 

Online 

Product Certification

 section.

Electromagnetic Compatibility

This product meets the requirements of the following EMC standards for 
electrical equipment for measurement, control, and laboratory use:

•

EN 61326 (IEC 61326): Class A emissions; Basic immunity

•

EN 55011 (CISPR 11): Group 1, Class A emissions

•

AS/NZS CISPR 11: Group 1, Class A emissions

•

FCC 47 CFR Part 15B: Class A emissions

•

ICES-001: Class A emissions

Note

For the standards applied to assess the EMC of this product, refer to the 

Online 

Product Certification

 section.

Note

For EMC compliance, operate this device with shielded cabling.

CE Compliance

This product meets the essential requirements of applicable European 
Directives as follows:

•

2006/95/EC; Low-Voltage Directive (safety)

•

2004/108/EC; Electromagnetic Compatibility Directive (EMC)

Online Product Certification

Refer to the product Declaration of Conformity (DoC) for additional 
regulatory compliance information. To obtain product certifications and 
the DoC for this product, visit 

ni.com/certification

, search by model 

number or product line, and click the appropriate link in the Certification 
column.

Manual

Sales:

 

+44 (0) 1273 570 220   

Website:

 www.amplicon.com   

Email:

 [email protected]

       IT and Instrumentation for industry

 Amplicon.com

Содержание NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды