Amplicon NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q Скачать руководство пользователя | Manualshive

Страница: 15 / 78

background image

Chapter 1

Getting Started

System Controller Slot

The system controller slot is Slot 1 of the chassis and is a 4-Link
configuration system slot as defined by the CompactPCI Express and
PXI Express specifications. It has three system controller expansion slots
for system controller modules that are wider than one slot. These slots
allow the system controller to expand to the left to prevent the system
controller from using peripheral slots.

The backplane routes a x4 PCI Express link from the system controller slot
to slots 3, 4, and 5, and a x1 PCI Express link to a PCI Express to PCI
Translation Bridge on the backplane. The PCI Express to PCI Translation
Bridge on the backplane provides a 32-bit/33MHz PCI bus to slots 2, 3, 5,
6, 7, and 8.

The system controller slot also has connectivity to some PXI features such
as: PXI_CLK10, PXI Star, PXI Trigger Bus and PXI Local Bus 6.

By default, the system controller will control the power supply with the
PS_ON# signals. A logic low on this line will turn the power supply on.

Note

The Inhibit Mode switch on the rear of the chassis must be in the

Default

position

for the system controller to have control of the power supply. Refer to the

section of Chapter 2,

Installation and Configuration

, for details about the Inhibit

Mode switch.

Hybrid Peripheral Slots

The chassis provides two hybrid peripheral slots as defined by the

PXI-5

PXI Express Hardware Specification

: slot 3 and slot 5. A hybrid peripheral

slot can accept the following peripheral modules:

•

A PXI Express Peripheral with x4 or x1 PCI Express link to the system
slot

•

A CompactPCI Express Type-2 Peripheral with x4 or x1 PCI Express
link to the system slot

•

A hybrid-compatible PXI Peripheral module that has been modified by
replacing the J2 connector with an XJ4 connector installed in the upper
eight rows of J2. Refer to the

PXI Express Specification

for details. The

PXI Peripheral communicates through the backplane’s 32-bit PCI bus.

•

A CompactPCI 32-bit peripheral on the backplane’s 32-bit PCI bus

The hybrid peripheral slots provide full PXI Express functionality and
32-bit PXI functionality except for PXI Local Bus. The hybrid peripheral
slot only connects to PXI Local Bus 6 left and right.

Manual

Sales:

+44 (0) 1273 570 220

Website:

www.amplicon.com

Email:

[email protected]

IT and Instrumentation for industry

Amplicon.com

«
...
13
14
15
16
17
...
»

Содержание NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q















































































Отзывы:

Нет отзывов

Похожие инструкции для NATIONAL INSTRUMENTS PXI Express NI PXIe-1062Q

Бренд: VIA Technologies Страницы: 18

Бренд: QERIDOO Страницы: 19

Бренд: JANE Страницы: 35

KIDS ZONE TRAVEL

Бренд: JANE Страницы: 19

Бренд: Hamax Страницы: 33

Бренд: Mutsy Страницы: 22

Бренд: Vestil Страницы: 25

Бренд: ENGICAM Страницы: 52

PRIAM LUX CARRY COT

Бренд: Cybex Platinum Страницы: 24

Бренд: Cybex Platinum Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды