Impact-E 3x series embedded computer user manual
Page 4 of 40
Safety Precautions
•
Before you unpack your embedded computer system, ensure you carefully
read through this manual and follow any related safety and operational
instructions.
•
Only suitably qualified and experienced personnel should access the
internals of the unit.
•
Before commencing work within the computer ensure that the mains is
disconnected from the computer and any attached peripherals.
Operation of your panel PC
Before operating your embedded computer please:
•
Read the equipment ratings plate and ensure that the mains circuit is
suitably rated to power the equipment, to avoid risk of overloading. Do not
use mains adaptors or extension cables.
•
Ensure that any cables connected to the equipment are made safe and do
not present a tripping hazard.
•
To avoid risk of electric shock ensure that equipment is plugged into a
suitably earthed mains outlet. Only use the power cord supplied with your
computer or power supply unit. Do not continue to use the cable if it is cut
or damaged.
•
Ensure the computer chassis is kept away from heat sources, such as
radiators and heating vents.
•
The computer must have sufficient free space around it to allow air
movement for cooling purposes. Failure to do so is likely to cause the unit
to overheat and become unstable.
•
Avoid connecting the computer to an electrical supply which may have
unacceptable interruptions, surges, spikes or noise. We recommend the
use of an uninterruptible power supply (UPS), surge protector or mains
conditioner to address the problem.
•
Turn OFF the system power before cleaning. Clean the system using a
cloth only. Do not spray any liquid cleaner directly onto the computer
surface.
Manual
Sales:
+44 (0) 1273 570 220
Website:
www.amplicon.com
Email:
IT and Instrumentation for industry
Amplicon.com
