P
UTTING THE
U
NIT INTO
O
PERATION
7
Registration
For operation you will have to register your transmit-
ter (camera) to your Amplicomms Watch&Care
V130/132:
1 Switch the transmitter off (switch set to
OFF
). Re-
move the batteries of the receiver for a few se-
conds if necessary.
2 Switch the receiver on.
3 Press and hold down the button
until
[C1]
appears in the display.
4 Use the
buttons to select the desired ca-
mera
[C1]
...
[C4]
.
5 Press the
button briefly. The Link LED fli-
ckers for approx. 10 seconds. During this time,
you must perform steps 6 and 7.
6 Switch the transmitter on (switch set to
ON
).
7 Press the registration key on the
back side of the transmitter. After a
short time the video from the
transmitter will appear on the
screen if the registration was suc-
cessful. If the registration failed,
“Out of Range“ appears on the
screen.
Helpline UK 0844 800 6503
(See Watch&Care V130/132 user guide for costs and hours of operation)
Содержание Watch & Care V131
Страница 1: ...Bedienungs anleitung User Guide Mode d emploi Watch Care V131...
Страница 14: ...12...
Страница 15: ...GER T IN BETRIEB NEHMEN 13...
Страница 16: ...Audioline GmbH D 41460 Neuss 12 2013 Edition 1 1 4 250711 991890...