13
O
PERATING THE
R
ECEIVER
Range
This icon flashes in the display when the distance between the trans-
mitter and receiver is too great.
Move the receiver nearer to the transmitter.
Registration
In delivery state the transmitter is pre−registered at the receiver. If necessa-
ry, registration can also be completed manually:
Transmitter/Receiver
1
Switch the transmitter off. Switch set to
OFF
. Remove the batte-
ries of the receiver for a few seconds if necessary.
2 Cover the light sensor with a black cloth and switch the transmit-
ter on. Position
ON
.
3 With the receiver switched on press and hold the button on the
receiver for a few seconds.
4 This icon appears in the display.
5 The Power LED on the transmitter flashes quickly for approx. 15
seconds.
6 Press this button to confirm the selection.
7 C1.... appears initially, then C1....OK.
When a connection is established, the image viewed by the lens
appears in the display.
If C1...X appears (registration failed), it may be necessary to remove the
batteries from the transmitter for a few seconds.
Helpline UK 0844 800 6503
(See page 18 for costs and hours of operation)
Содержание Watch & Care V100
