Amplicomms TCL 190, Руководство по эксплуатации

Страница: 10 / 15

Settings and Functions
25
Setting the snooze delay
SNOOZE
0m 5m 15m
Use the sliding switch (9) to set the interval for the
snooze delay. There are three settings available,
from left to right 0 min", 5 min" or 15 min.".
Activating the snooze delay
If the snooze button is pressed at anytime when the light is
switched off, then the illumination will switch on for 30 seconds
to allow the user to see the time. After 30 seconds the
illumination will go out.
SNOOZE
Press the Snooze button (1) to interrupt
the alarm for a specific time before it
automatically resumes. To activate the
Snooze function, refer to Setting the
snooze delay".
Activating the vibration pad
After having connected the vibration pad
supplied, you can use the switch on the
vibration pad to switch the vibration
function on and off. There are two settings
available, from left to right On" or Off".
0844 800 6503 (Using an UK landline, at the time of going to print: calls cost 6p for connection charge and then 5p a minute. Mobile costs may vary.)