Amplicomms BTH 1410-NL, Руководство пользователя

Страница: 24 / 146

O
PERATION
20
Operation
1 Switch the ON/OFF switch on the receiver to ON position.
2 Make sure the Bluetooth connection is established (indicator LED lights
blue)
3 The neck-loop induction cable can transmit the audio signal to the hearing
aid device for listening.
4 Adjust the desired volume.
5 Adjust the tone clarity setting if necessary.
To set the tone clarity briefly press the TONE button repeatedly.
- 1 short beep: Treble boost
- 2 short beeps: Bass boost and treble boost
- 3 short beeps: Bass boost
- 1 long beep: Flat
6 Adjust the balance (left/right) if neccessary.
The balance control can be used to pan to the required stereo channel
content. For example if the speech in a stereo audio signal was more
prevalent in the left channel then the balance can be tuned to the left to
emphasise the signal better.
Note : When the battery level is low, the indicator LED sparkles in blue
(Bluetooth mode) or in green (MIC mode). You will hear 3 beeps every
minute and 1 double-beep in the forth minute. The receiver will switch
off automatically in the fifth minute.
Hearing damage due to high volumes!
This receiver allows you to set higher volumes than conventional head-
phones. This can cause hearing damage in persons with healthy hearing
and especially in children.
• Before putting the receiver on, set the volume on the receiver to a low
value.
• Do not continuously expose yourself to high volumes.
Helpline UK 0844 800 6503
(See page 25 for costs and hours of operation)