To use the alarm
1. Set the alarm time and switch the alarm on.
2. When the alarm time you set is reached, the alarm
starts to sound. It continues for about one minute or
until you stop it by pressing the Snooze/Light button.
• When the alarm starts to sound, the Alarm indicator
flashes on the display. This indicates that the Snooze
function is activated.
3. About four minutes after you press the Snooze/Light button, the alarm starts
to sound again.
4. The above repeats up to seven times, or until you switch the alarm off ( by
sliding the Alarm on/off switch to the OFF position).
• You can stop the repeating alarm at any time by sliding the Alarm on/off
Switch to the OFF position.
• The beep pattern of the alarm changes (becomes faster) as the alarm
sounds. The pattern changes up to five times.
Important!
• The Snooze function does not operate while the Selector is in any other
position besides NORMAL. Always make sure that the Selector is set to
NORMAL before using the alarm.
Alarm indicator
ALARM
TCL-100-2
