Assembly Instructions
AMPHORA Plus
The glazing is very fragile and the edges are
prone to damage during the transport or
assembling.
When working with the shaped pieces of the
body, proceed very carefully, do not use exces-
sive force.
If a light damage occurs, you can use the
supplied silicone caulk or any nail-polish with
similar colour to paint over it.
Warning
1)
Using a bonding agent, glue the bio-mat (part I1 rear bottom according
to the cutting plan of the bio-mat) to the bottom cutout of the bottom rear
plate, place the plate by this bottom side with the bio-mat to a stand.
2)
Using a bonding agent, glue the bio-mat (part I2 front bottom according
to the cutting plan of the bio-mat) into the bottom cutout of the bottom
front plate, place the plate by this bottom side with the bio-mat to the stand
3)
Place the inner plate
into the bottom plate cutout.
LIST OF SUPPLIED PARTS
Cutting plan of the bio-mat
Part I1 Rear bottom
Part I2 Front bottom
Part I6 Front body
Parts I5 Rear body 1 and 2
Part I4 Central body
+
Process
SEALANT
20x
SILICONE CAULK
3x
2x
M10x65 (2x)
