Amphony 2500 Скачать руководство пользователя страница 5

Problem 11: Audio at headphones is not loud enough.

1st possible cause: 

Transmitter audio level control set too low (if analog audio interface is used)

What to do:

 Adjust the transmitter audio level control.

2nd possible cause:

 Insufficient audio level at digital audio interface (if digital audio interface is 

used)

What to do:

 Set the audio device to deliver maximum audio volume at the digital audio output or 

use the analog audio interface of the transmitter

Problem 12: Audio crackles between music tracks.

Possible cause: 

Audio source interrupts digital audio output between audio tracks (if digital audio 

inerface is used).

What to do:

 Some audio devices will briefly interrupt audio output between music tracks which 

causes the transmitter to switch to the analog audio interface. Try to eliminate the interruption or use 
the analog audio interface.

Problem 13: Transmitter doesn’t switch to digital audio interface.

1st Possible cause: 

Digital audio output not active.

What to do:

 Ensure that the digital output of the audio device is activated.

2nd Possible cause: Faulty cable

.

What to do:

 Try using another digital audio cable.

Contacting Amphony S upport

For contact details and Local Sales Representatives, visit the Amphony web site at:

http://www.amphony.com

Amphony has made best efforts to ensure that the information contained in this document is accurate and reliable. However, t he
information is subject to change without notice and is provided “AS IS” without warranty of any kind (express or implied). No
responsibility is assumed by Amphony for the use of this information, nor for infringements of patents or other rights of third
parties. This document is the property of Amphony and implies no license under patents, copyrights, trademarks,  or trade
secrets. No part of this publication may be used as a basis for manufacture or sale of any  items without the prior written consent
of Amphony. The names of products of Amphony or other vendors and suppliers appearing in this document may be trademarks
or service marks of their respective owners which may be registered in some jurisdictions. A list of Amphony trademarks and
service marks can be found at http://www.amphony.com.

© 2004 Amphony                                   November 2004                                                                     5

Содержание 2500






Отзывы: