5.8 GHz DIGITAL Wireless Headphones, Model 2500
Below are some common problems and their solutions for your product. If your problem is not
among those problems mentioned below then please contact your dealer for further assistance.
A) Problems during installation
Problem 1: Audio device doesn’t have a digital or RCA type line output.
What to do:
The transmitter analog audio interface can also be connected to headphone type
outputs (3.5 mm or 6.3 mm type outputs) by using a 3.5 mm-to-RCA or 6.3 mm-to-RCA adapter.
Please contact your dealer for such an adapter. Usually such outputs have a volume control that
can be used to adjust the audio output level.
Problem 2: Battery lid at headphones doesn’t open.
What to do:
Press the very outside edge of the battery lid firmly into the capsule as illustrated in the
manual. The battery lid will flip open.
B) Problems during operation
Problem 3: None of the interface indicator lights light when power is
applied to the transmitter.
1st possible cause:
Faulty power outlet.
What to do:
Check the power outlet using another appliance or a voltage tester.
2nd possible cause:
Faulty AC adapter.
What to do:
If possible, check the voltage of the supplied AC adapter. Otherwise contact your
dealer.
© 2004 Amphony November 2004 1
Troubleshooting Guide
R
R
