1
2
3
1
2
3
430 mm / 17”
5
Line level signal inputs
Balanced 3-pin XLR female line level signal in for each channel. Always use the matching input channel to
output.
Speaker outputs
The speaker terminals are equipped with Speakon terminals. For best results use a good speaker cable and
terminate them with Neutrik Speakon NL2 FX, which houses cable diameters from 6 to 10 mm. Each channel
is active when cables are inserted. Always use the matching input channel to output.
Power input
Amplifier automatically selects the correct voltage in the 100-240V range, and is internally fused. Connect
the AC line cord by orienting the IEC plug correctly, and pushing the plug firmly into the IEC receptacle. It
should seat tightly. It can only be inserted when it is properly oriented.
Back panel connections
PLEASE NOTE!
Always turn power off before inserting or removing cables.
PLEASE NOTE!
Use the best possible connection to the AC power source. Avoid extension cords as they
will cause some voltage drop between the AC source and your amplifier. If the use of an extension cord is
required, ensure that it is the shortest length possible and is at least #14 AWG. Ensure that all grounding
connections are maintained. NOTE: Excessive length or inadequate gauge may result in short muting
episodes if all channels are driven to full power
!
!
